Door panels were looking tired, the fabric had come seperated due to the foam disintergrating.. 

Foam failed on the door panel.. 3/16 headliner material placed behind the original alcantra and glued then tucked back in place. All fixed:)

Interesting for you

SVE hood strut kit

SVE hood strut kit

DIY Repair
New SVE hood strut kit from LMR.
Inner Fender well replacement

Inner Fender well replacement

DIY Repair
Here's my inner fender project I did from over the summer. This shows each stage. Original, wire brushed, primed, undercoated.
Rear bearing replacement

Rear bearing replacement

DIY Repair
The right rear axel seal and bearing keeps leaking so I had to replace it. This was after rebuilding the entire rear end 2, 000 miles ago. Bummer
Climate Control Replacement

Climate Control Replacement

DIY Repair
Bought a used climate control unit from the junk yard a few months back. Finally got around to installing it. Looks 100100x better than the old...
Welding some frame.

Welding some frame.

DIY Repair
I had a little crack in the frame kinda near the driver side engine mount, so I figured I patch that up before it got worse.
PATS anti theft REAL bypass

PATS anti theft REAL bypass

DIY Repair
Well my mountaineer has been out of commission since last September due to my pats theft randomly triggering, leaving me confused and not knowing...