Intake and chip 

Intake from hpsi chip from jets performance

Total Cost: $700

Interesting for you

The engine

The engine

Engine
The engine in the mustang is a 331 stroker. It has a roller cam, forged rods and pistons, TFS 170 aluminum heads, air gap intake, and...
Engine oil issues

Engine oil issues

Engine
So we get it running and it keeps blowing the o ring off the oil filter. So we raise it pull the pan and Change the pump to solve the problem.
The powerplant

The powerplant

Engine
It’s been a long arduous road, being a 1 man band and learning as I go has done nothing but delay much of the progress. But none the less,...
Performance

Performance

Engine
Well I finally put my free time to good use. Put the screaming Deamin coil with 8. 5 mm super conductor spark plug wires. It took about an hour...
433 getting back on track

433 getting back on track

Engine
I haven't updated my engine build for a variety of reasons. I was sick for weeks this spring, then the pistons were not machined correctly and...
433 off the test stand

433 off the test stand

Engine
I got the 433 on the engine test stand at Paul Knippen's Muscle Motors and it passed it's first hurdle. Oil pressure is about 68 psi and the...