ZR1 Dyno run at Aikman Performance - Drivn

ZR1 Dyno run at Aikman Performance 

Ok, unfortunately I don't have a baseline without the GM Performance CAI. However, I do have a nice set of numbers with it. Aikman uses a chassis dyno so I'm pretty confident with the numbers.

Video below for those that want to watch. Sounds great. Turn up your speakers!

Bottom line: 692hp/673tq at the wheels.

Interesting for you

Advanced Full Synthetic Oil

Advanced Full Synthetic Oil

Engine
Since my Gyebaek's Viscosity is 5W-20 I'm currently running on Mobil 1 Extended Performance Adcanced Full Synthetic Oil along with Mobil 1...
Distributor ticking

Distributor ticking

Engine
It would not let me add a video so this is going to be my replacement distributor. Any suggestions? Feel free to chime in thanks. ✌
Getting the car to start

Getting the car to start

Engine
Well, when I finally brought home the car. I did the usual and try starting it, it turned over fast but would fire. It was getting fuel but no...
Engine is ready to install

Engine is ready to install

Engine
Completely rebuilt numbers matching 350. Every nut and bolt replaced or refinished to show car quality. New Flex-a-lite 18" flex fan. I used the...
Engine and transmission

Engine and transmission

Engine
The block had a crack in one cylinder so a sleeve had to be installed and bored 30 over.
1,000+ Hp

1,000+ Hp

Engine
New Weiand 8-71 Supercharger installed with twin Holley 950cfm Blower carbs running 13% overdrive at 8 psi of boost. Need to get her on the dyno...