Slotted and cross drilled rotors! 

Was time to do brakes, as I had a warped rotor, so after a bit is searching around, I found a full set of Slotted and cross drilled rotors, and Ceramic pads(all 4 corners) for ~200$ shipped! Swapped em on, and they work like a charm! And no more vibration or pulling under high speed braking! And they look good too!

Total Cost: $200

Interesting for you

Calibers got some powda!

Calibers got some powda!

Brakes
Just got my claibers back from the shop. Came out pretty good. Now I just need to get 18s to run them.
Stopping Powa!!!

Stopping Powa!!!

Brakes
Just put the gxp calibers on the front and what a difference!!! Here are some before and after pictures.
New brakes for Big Red!

New brakes for Big Red!

Brakes
New brakes all around. The factory brakes lasted 140, 697 miles and 21 years! Time for new brakes , master cylinder , calipers , rotors , pads and...
New brake calipers& brake hoses

New brake calipers& brake hoses

Brakes
The old calipers were factory also and after 30 years they need to be changed "safety reasons precaution " but the hoses were horrible they were...
My Cutty

My Cutty

Brakes
I converted the front drum brakes on the Cutty to disk brakes. I got a Corvette master cylinder for a disk/disk setup and I added a shut-off valve...
G-2 Caliper paint, head lamp blackouts

G-2 Caliper paint, head lamp blackouts

Brakes
May 2016 I used the long holiday weekend to paint the calipers with the G-2 paint system. Also installed the Anchor-Room headlamp amber blackout...