Its back and alive 

Been gone for a while however I'm back and able to show what Ive been busy with. 67mm On3 Turbos

Total Cost: $4,000

Interesting for you

Carb Swap

Carb Swap

Engine
I put about 150 miles on the car over the last several weekends. I wan't to get 500 before turning up on the new motor. I have the rev limiter set...
More HP

More HP

Engine
Went from stock 80mm to 85mm throttle body, in addition to the Airaid TB spacer.
Cam is now in.

Cam is now in.

Engine
Thanks to a dude I used to work with the cam bearings are now in and its time to finally rebuild.
"Aquarius"

"Aquarius"

Engine
Engine is stock except for bolt on's and tune, 41, 000 miles at this time, future plans are for srt forge wheels.
Preventive maintenance

Preventive maintenance

Engine
Swapped from the Comp Cams needle bearing trunion kit to the Engine Pro bronze kit. Kept having nightmares of needle bearings rolling around...
Unforseen maintenance

Unforseen maintenance

Engine
Had to replace the fuel filter as well as the plugs and plug wires all because the truck ran rough. Turned out to be a melted wire plugged filter...