You light up my night.. 

During the bumper planning,the lighting is up to bat. I want this to be a "poster child" for a complete lighting system that will be versatile. Like always I chose Baja Designs lighting to be the only off-road lighting I use. The quality, reflectors, and customer service are second to none. The bumper is a great platform for the design I chose. To start out I am am going to be installing 3 Baja Designs LP9's in the center. These massively, bright lights and will do most of the heavy lifting

Lighting Chart with all of the zones important for coverage

https://www.bajadesigns.com/

Specifications: LP9's

These will cover zone 3 and 2

Forward Projecting Lumens: 11,025 Utilizing 9 LEDs
Forward Projecting Wattage/Amps: 105W / 7.6A

IPT Lumens: 2,280 Utilizing 6 LEDs
IPT Wattage/Amps: 21W / 1.52A
Dimensions: 8" Diameter/ 3.25" Depth
Weight: 6.5lbs
LED Life Expectancy: 49,930 Hours
Front Lens: Hardcoated Polycarbonate
Housing: Hard Anodized Machined Aluminum
Bezel: Billet Machined Aluminum

Next up will be the 2 to 4 lights on either side of the LP9's. Not sure how crazy I want to go yet

These are called Baja Designs Racer edition, which will give the longest range forward.

These will cover Zone 4 on the chart

Specifications: Racer Edition

Lumens: 4,300 Utilizing 4 High Intensity LEDs

Wattage/Amps:

40W / 3.33A

Dimensions: 4.43" x 3.65" x 4.43"
Weight: 2.45 lbs
LED Life Expectancy: 49,930 Hours
Front Lens: Hardcoated Polycarbonate

Housing: Hard Anodized & Powder Coated Cast Aluminum

Bezel: Billet Machined Aluminum
Hardware & Bracket Material: Stainless SteeL

The grill will get 2 Baja Design S8's, with a combo pattern in amber. For the best view with dust and fog. They also have a secondary backlit feature, you can tie in with your running lights

Specifications: Baja Designs S8

These will cover Zone 1 for dust

Lumens: 4,520 Utilizing 8 Cree LEDs

Wattage/Amps: 40W / 3.33A
Dimensions: 10” x 3” x 1.6”
Weight: 1.7 lbs
LED Life Expectancy: 49,930 Hours
Front Lens: Hard Coated Polycarbonate
Housing: Aircraft Grade Aluminum w/Mil-Spec Hard Anodize
Bezel: Billet Machined Aluminum
Hardware & Bracket Material: Stainless Steel

The rear bumper will get (2) Baja Designs Squadron Sports , in the combo pattern. These will work great for backup lights and give me range, when I am off-road

Specifications: Baja Designs Squadron Sport

Lumens: 2,260 Utilizing 4 LEDs

Wattage/Amps: 20W / 1.4A
Dimensions:

3.50" x 2.77" x 3.50"

Weight: 12 ounces
LED Life Expectancy: 49,930 Hours
Front Lens: Hard Coated Polycarbonate
Housing: Powder Coated Cast Aluminum
Bezel: Billet Machined Aluminum
Hardware & Bracket Material: Stainless Steel

The last light for this round is the Baja Designs RTL-S . This is a multi function light that has super bright turn signals, brake lights and a white light for rear viewing . This will be mounted on the soon to be ICi Bedrack .

Specifications: Baja designs RTL-S

Wattage/Amps:Amber Turn Signal (each): 5W / 0.36 amps

Running Light: 1.1W / 0.8 amps
Brake Light 20W/ 1.45 amps
White Light 18W/ 1.30 amps
Dimensions: 32.125" x 2.15" x 1.5"
Weight: 3.75 lbs
LED Life Expectancy: 49,930 Hours

Front Lens: Hard Coated Polycarbonate

Housing: Aircraft Grade Aluminum w/Mil-Spec Hard Anodize
Hardware & Bracket Material: Stainless Steel.

I also have some S2 side lights I will have to work into the mix.

Specifications: Baja Designs S2

Lumens: 2,450 Utilizing 2 LEDs
Wattage/Amps: 20W / 1.66A
Dimensions: 2.93" x 1.76" x 1.68"

Weight: 8 ounces
LED Life Expectancy: 49,930 Hours
Front Lens: Hard Coated Polycarbonate
Housing: Hard Anodized & Powder Coated Cast Aluminum
Bezel: Billet Machined Aluminum
Hardware & Bracket Material: Stainless Steel

Baja Designs LP9
Baja Designs Racer Edition
Baja Designs S8
Baja Designs RTL-S
Baja Designs S2

Next up How do you control all of these lights? My answer is a Switch Pros 8100. The just pre released the 9100, so i will have to decide if i want the upgrade it has a few more features http://switchpros.com/ . I actually have it installed on my console and brought it alive. I will put switch names on it after all the lights are connected and working

Interesting for you

LED fog lights for 6.2 Raptor

LED fog lights for 6.2 Raptor

Off-Road Lights
I like trucks with fog lights in them but not the stock lighting so it was due for and upgrade
I can see

I can see

Off-Road Lights
Another little touch to brighten the way.
Roll bar and 2nd □body

Roll bar and 2nd □body

Off-Road Lights
Went and picked up a roll bar with 5 kc lights(2 need to be put on) today for 200$ needs some touching up for a good deal to make Black Beauty...
Roll bars and Ditch lights

Roll bars and Ditch lights

Off-Road Lights
A little while back I got some Roll Bars and installed my ditch lights that had been sitting around forever. I always forget to post on here...
Turn night into day

Turn night into day

Off-Road Lights
A little over a week ago we were able to mount the 4 5 inch round lights on the Go Rhino bed roll bar. It required custom spacers to raise them...
Trails

Trails

Off-Road Lights
TTook the xj into the woods for the first time