The big thump 

So I have been planning on building my stock block 302 for a while now. It started off with a b303 ford racing cam and gt40 heads. So after I bought AFR 165 heads and the car make pretty decent power 305/347.

NOW for the big upgrade I pulled everything off the block and I pulled the b303 cam and I am going with the Anderson N41 cam. All around great power curve and a good daily cam. With this setup and a small 150shot I should be at my goal of 400hp

Interesting for you

Parts...... parts...... and more parts!

Parts...... parts...... and more parts!

Engine
Decided to replace the cam, lifters, timing chain, manifold, valve covers and add EFI! Nothing wrong with upgrades since it's torn apart. Woot!
Holly 1850 leaker

Holly 1850 leaker

Engine
Well went to start Sarge after awhile of being down and saw something leaking on engine, well what do you know the freakin carb is leaking great....
Cold season!!!!!!!

Cold season!!!!!!!

Engine
Some do forget that the cold can take its toll on our babies. So lets not forget to#1change wiper blades. #2 if you have a battery that is over a...
Fresh breath

Fresh breath

Engine
Well I just ordered Fitech's Go EFI 4 and Fuel Command Center Kit for Olé Doc Ray. Figured it was time while he is all pulled apart, it will...
Air Flow Research

Air Flow Research

Engine
AFR heads are the real deal. Had a set of K code hipo SBF heads that had been ported by Clay Smith way back in the day. They were very...
Time to up the ante, and the HP!

Time to up the ante, and the HP!

Engine
I've enjoyed the Stage 1 power for over a year now, and decided to go ahead and upgrade to Stage 2. I had originally delayed because I didn't want...