512 build - Drivn

512 build 

4.380" bore 4.250 stroke 6.536 H beam rod 440 SOURCE STROKER KIT
(.040 over) -24cc dish
1.320" 9.9 to1 comp
Indy single plane intake
Howards Cams solid flat tappet .579 lift 248 @.050 duration
Trend Performance Products custom push rods
& tool steel solid lifters
440 source SUPER STEALTH heads flow 330 @ .650 lift,,,
THIS IS A STREET BUILD, yes the Charger has COLD A/C 3.54 rear gear, a518 overdrive with lock up torque converter
Holley 950 hp carb,, for now

Machine work done by G & G performance co in Tomball TX

Interesting for you

Lil burnout after I had it tuned by Justune performance

Lil burnout after I had it tuned by Justune performance

Engine
It made 470hp to the crank and 428hp to the wheel and 435 torque after the tune running really nice
Out with the old

Out with the old

Engine
So a opportunity came up and I had to jump on it. I traded my B18a engine for a QSD h2b setup. Engine is out, prepping the h series to go in. ...
Bare frame

Bare frame

Engine
Finally got everything apart to bare frame. Time to get the block cleaned and stroked. Still deciding if we want to go to 3. 1 or 3. 4. But...
The 351 is back

The 351 is back

Engine
The rebuild is complete. The pistons are now flat top that are 30 over. The cam is a melling mild street cam. Now I'm cleaning the oil pan and...
Head Gasket

Head Gasket

Engine
Well she blew a head gasket. So the heads are in the machine shop getting a valve job and resurfaced. Should be up and running by this weekend.
Rotor swap complete and installed

Rotor swap complete and installed

Engine
Got the m122 rotors installed in the m112 case, Got the drive shaft in, the rear diff cover on, and the 4# lower pulley installed, also got...