Power bug 

Stage 1 push rods and valve springs and shimed to run 55 psi of boost arp head studs honey badger hpop stage 2.5 80% over Injectiors 2003 powerstroke turbo with a banks upgraded turbo wheel and a 60psi wastegate oil catch can 3" down pipe to 4" with mbrp muffler ladder bars and a 3" body lift and I have a 80hp flash on the pcm

Total Cost: $8,000

Interesting for you

Spring is springing...

Spring is springing...

Engine
Got my car back from The Mustang Shop (Greer, SC) Friday. Had Kooks long tubes and off road x-pipe installed, along with a 3. 5 inch blower...
Going back together

Going back together

Engine
Rotating assembly spec'd to near perfection, should be completely assembled in the next couple days and hopefully the car running before end of...
DYNO Pull 2

DYNO Pull 2

Engine
September 2016 Next run with updated tune at MJD Performance.
New Motor

New Motor

Engine
New engine and paint added to the engine bay. It looks awesome! More pictures to come. Everything is not done yet, but one step closer.
Getting the car to start

Getting the car to start

Engine
Well, when I finally brought home the car. I did the usual and try starting it, it turned over fast but would fire. It was getting fuel but no...
Building the 408

Building the 408

Engine
Block has been bored 30 stock crank but turned 20 eagle H beam rods forged speed pro piston comp rv cam and springs roller rockers and moly...