433 getting back on track 

I haven't updated my engine build for a variety of reasons. I was sick for weeks this spring, then the pistons were not machined correctly and then my wife was in the hospital for a week. Anyway, time to get some motivation going so I cleaned up everything and painted the block. I ended up using POR15's engine enamel again and roughly tried to approximate the appropriate 455HO color. It should be a tad lighter but I like it a shade darker blue. I used 4 parts Chrysler blue, 1 part White, then thinned the mixture 10% with lacquer thinner, It came out way better than I expected with only a few dry spots where it was hard to get a full size HVLP gun to go.

Total Cost: $90

Interesting for you

Back at the tuners .....

Back at the tuners .....

Engine
Took the Camaro to the tuners and hopefully it'll be a while before I need to take her back. As I posted before, after the install of my CAI, had...
Engine compartment lit up for car shows

Engine compartment lit up for car shows

Engine
Green LEDs lite the engine bay for nite time car shows
Engine cleaning

Engine cleaning

Engine
So today was my first try at powerwashing and cleaning my engine a little green soap and lowpressure. . . came out pretty good
Katech Street Attack Z06 SN#40 build thread

Katech Street Attack Z06 SN#40 build thread

Engine
We just started on this Z06 and since the forum is a little slow on projects I thought I would post a build thread to follow it's progress....
Rat Engine Installed

Rat Engine Installed

Engine
I've been working on the engine upgrade. The 427 is in but not hooked up. Left header isn't going in easy. Trying to finish it so I can get the...
Carb tune

Carb tune

Engine
Tuned the Carb ! The Alc-ey Carb doesn't like stuff to sit in it. . . . . . . .