Big changes for my Sierra. 

Well, I started off deciding to do a suspension refresh on the front. New everything. Inner and outer tie rods, steering knuckles, upper and lower control arms, sway bar links, CV axles, hubs. While I had everything apart. Some of the frame rust had to go. I bought myself a 40lb media blaster and got to using that along with a knotted wire wheel on a 4" grinder. Once clean sufficiently the frame was coated with Chassis Saver rust prevention paint. Time to put it all back together. Wait a minute though. You know, it's been bugging me since I put on the 2.5" Rough Country lift. Those shocks are just garbage and I wanted to really lift it. That's it. Time to order a 6" Superlift knuckle lift. It would ride on General Grabber 35x12.5 tires and Granite Allot GV8 wheels in an 18x9 with -12 offset. Shocks would be Superride by Bilstein. While at it. I got new front brake calipers by Powerstop. Also painted all of the new parts. Some just black with Chassis Saver and some I top coated with a dark cherry red paint.

Interesting for you

Coilovers

Coilovers

Suspension
I been slacking with my pictures and updates. I had picked up a set of RSK coilovers. Their koni shocks with FK springs. As she sits, ...
The Eibach springs

The Eibach springs

Suspension
Last week installed all 4 springs had the Mustang lowered 2inches red Eibach Springs lowering kit. Rides smooth a little low to the ground here...
New shocks

New shocks

Suspension
Today I replaced the rear shocks . They were the actual factory shocks 30years old . When u drive it felt like a boat and didn't feel to safe...
Doing my lift

Doing my lift

Suspension
Doing my lift and new wheels and tires
6" zone lft

6" zone lft

Suspension
I decided to go from a three inch lift to a six inch. Also had to replace the driver side wheel hub assy and CV shaft.
Upgrading my steering assist

Upgrading my steering assist

Suspension
Just going from a single shock stabilizer to a dual shock stabilizer let me know what you think. y