Resurrection of the beast 

So awhile back I put a Whipple on the car and got it tuned by a excellent tuner in Tacoma WA. Well it blew an 8 inch hole in the side of the block. DEAD>>>>

Now I have built a new motor and getting it tuned soon.

Short block by BES Racing in Indiana, forged rotating assy, 9.5/1 comp, MDS delete, Comp cams 270, Cam phaser limiter, 6% O.D. ATI dampener, Heads shaved 0.005 and lite blending of the runners, 0.040 Thick Head gasket, ATI flex plate, Pro-torque 2800 stall converter, SHR War viking NAG1 transmission, Hemituner custom TCM, API comp fuel pump.

Total Cost: $19,000

Interesting for you

Engine mock-up.

Engine mock-up.

Engine
Mock-up of engine in front of my state of the art shop. Although most of the car was built before the carport.
The squirrel that brought down the tank

The squirrel that brought down the tank

Engine
About 1 year ago in the winter woke up one ice cold morning and the tank wouldn't crank. After a few minutes of messing with key and fuses popped...
Total engine build for the Black Widow.

Total engine build for the Black Widow.

Engine
Well after that used hunk exposed its innards, it was time for me to buck up and really build something to last. At this point i knew it was...
Rebuilding the 351W instead

Rebuilding the 351W instead

Engine
The LS3 is going to need a lot of custom parts made and a much bigger budget than I want or can spin in the car at the moment. I'll probably sell...
Getting close to be running

Getting close to be running

Engine
Dropped in mild built 454 in and few things left and will be running
Power bug

Power bug

Engine
Stage 1 push rods and valve springs and shimed to run 55 psi of boost arp head studs honey badger hpop stage 2. 5 80% over Injectiors 2003...